ATE offers the most comprehensive range of premium aftermarket brake parts for European vehicle applications in North America, including brake pads and shoes, drums, rotors and hydraulic parts.Features of the ATE Coated Rotor:
Coated with a highly-durable alloy coating to provide reliable corrosion protection
Extremely resistant to high temperatures
Clean, like-new appearance will last longer than standard, uncoated rotors
Ready to install right out of the box – No cleaning required!
Installation Tips
Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function