More Information for CENTRIC 12167077
{Alternate Inventory Numbers: 121.67077}
Continue Shopping
CENTRIC 12167077  
CENTRIC 12167077close
Part image
Sold Individually
CENTRIC 12167077 Specifications
ABS Sensor Ring IncludedNo
Bolt Circle Diameter (IN)5.118
Bolt Circle Diameter (MM)130.000
Disc MountingFloating / DIH
Discard Thickness (IN)0.559
Discard Thickness (MM)14.200
Hat ID (IN)6.768
Hat ID (MM)171.900
Misc Holes5
Nominal Drum Diameter (IN)6.756
Nominal Drum Diameter (MM)171.600
Nominal Thickness (IN)0.630
Nominal Thickness (MM)16.000
Outside Diameter (IN)11.020
Outside Diameter (MM)279.900
Overall Height (IN)3.232
Overall Height (MM)82.100
Solid Or Vented Type RotorSolid
Surface TypeSmooth
Centric C-Tek brake rotors provide exceptional quality and value.

Features & Benefits:
  • Optimal surface finish for consistent stopping power from the first stop
  • OE vane design and plate thickness for heat capacity and strength
  • Low initial lateral run-out and disc thickness variation for smooth, vibration free stopping
  • Precision balanced for vibration free performance
  • G11H18 metallurgy
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - https://www.p65warnings.ca.gov/

Attention California Customers - WARNING: Cancer and Reproductive Harm

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

CENTRIC Regular Inventory Warranty Information:
90 days/3,000 miles