More Information for WAGNER BD180593E
Continue Shopping
 
WAGNER BD180593E  
$104.79
Price
$0.00
Core
$104.79
Total
WAGNER BD180593Eclose
<
>
Part image
Sold Individually
WAGNER BD180593E Specifications
ConstructionFull Cast
Disc FinishDirectional
Height (IN)2.402
Height (MM)61.0
MaterialCast Iron
Nominal Thickness (IN)1.024
Nominal Thickness (MM)26.0
Outside Diameter (IN)11.811
Outside Diameter (MM)300.0
Rust Resistant CoatingYes
Solid Or Vented Type RotorVented
Surface TypeSmooth
Black E-Coat on Non-Braking Surface
Wagner® E-Coat Brake rotors are engineered for maximum performance with an E-Shield® protective electro-coating applied to all non-braking surfaces. This black-colored coating prevents corrosion, makes removal for service fast and simple, and is visually attractive for open spoke wheels. A turned, smooth surface finish aids in the proper seating of the friction and requires less time for rotor “break-in".

Features & Benefits:

  • A precision cut finish of the outer diameter prevents improper balance issues that can result in a loss of vehicle control
  • A smooth finish aids in the proper seating of the friction resulting in less time needed for pad “break-in”
  • OE Specific vane design provides effective cooling capabilities resulting in increased stopping power and decreased noise, vibration and harshness
  • E-Shield coating is applied to all non-braking surfaces which prevents corrosion and is visually attractive
  • Tighter tolerance specifications reduce thickness variation and lateral run-out to ensure a balanced rotor that reduces pedal pulsation and extends pad life
  • Wagner utilizes a combination of premium grade iron, a stringent casting process and a controlled manufacturing environment which results in superior braking performance

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Videos

Product Highlight: Wagner E-Coat Rotors


How to Install Brake Pads and Brake Rotors



Warranty Information:
12 Months / 12,000 Miles