| MAS BJ69305 Specifications |
|---|
| Adjustable | No | | Attachment Type | Pinch Bolt | | Bearing Material | Polymer | | Bolts/Studs Included | Yes | | Castle Nut Included | No | | Cotter Pin Hole | No | | Dust Boot Material | Rubber | | Greasable | No | | Housing Press Fit Diameter | 38.4 MM | | Material | Steel | | Mounting Hardware Included | Yes | | Mounting Hole Quantity | 0 | | Mounting Type | Press In | | Package Contents | 1 Ball Joint; 1 Bolt; Clip; 1 Nut | | Stud Thread Diameter | 18 mm | | Stud Type | Pinch Bolt | | Suspension Grade Type | Standard | | Thread Pitch | M1.5 |
|
|
MAS products are precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
 Greasable vs. Non-Greasable
| NON-GREASABLE |
- Pros: Non-Greasable Ball Joints do not need to be serviced regularly. After installation, these Ball Joints require little upkeep and primarily need to be monitored for signs of failure.
- Cons: Since these Ball Joints cannot be re-greased, the entire Ball Joint must be replaced at the first sign of wear / noise as to not risk failure.
|
| GREASABLE |
- Pros: Greasable Ball Joints are serviceable and contaminants can be flushed out easily. Regular maintenance and greasing also means you'll be more in tune with the wear status of the joints.
- Cons: These Ball Joints need to be checked and greased regularly. The relubrication schedule can be the same as your vehicle’s oil change interval.
|
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 40160ED00A, 545001Ka0B, 545005SN1A, 545011KA0B, 545015SN1A |
MAS Warranty Information:Limited Lifetime |
|
