FRAM
More Information for FRAM PH3519A
Continue Shopping
 
FRAM PH3519A  
$5.44
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$5.44
Total
FRAM PH3519Aclose
<
>
Part image
FRAM PH3519A Specifications
Anti-Drain Back ValveNo
Bypass Relief ValveNo
Drain Plug IncludedNo
Filter TypeSpin-On Canister
Gasket Inside Diameter (IN)2.422
Gasket or Seal IncludedYes
Gasket Outside Diameter (IN)2.797
Gasket Thickness (IN)0.047
Gasket TypeBase
Height (IN)5.156
Housing ColorOrange
Inlet TypeThreaded
Inside Thread Diameter (IN)1 1/8-16
Marine ApprovedNo
Non Slip GripNo
Outside Diameter (IN)3.656
ReusableNo
Thread SizeStandard
Torque NutNo
Wearguard HD Spin-on; Includes Gasket
With 10,000 miles of protection, Extra Guard® is the perfect filter for everyday drivers who perform oil changes at OE recommended intervals. Extra Guard® has cellulose and glass blended media that provides advanced engine protection for your vehicle. Engineered with a silicone anti-drain back valve, Extra Guard® meets all manufacturer's recommended change intervals.

FRAM Extra Guard provides the perfect balance of dirt-trapping efficiency and dirt-holding capacity.

Features & Benefits:

  1. SureGrip: Provides non slip surface for easier installation and removal.
  2. Media: Fiber and resin blend creates a proprietary filter media to capture 95% of dirt particles that cause harmful engine wear.
  3. Anti-Drainback Valve: Silicone anti-drainback valve delivers superior start-up engine protection with up to 3X the hot oil resistance.
  4. Gasket: Internally lubricated sealing gasket for easier filter removal.

Which Oil Filter Is Right For You?

Driving Style
Filter Type Oil Change Intervals Normal City / Highway Heavy Traffic Dirty / Dusty Conditions Extreme Weather Towing
Economy
3,000 - 5,000 Miles        
Standard Replacement
OEM Recommended    
High Performance / Heavy Duty
OEM Recommended

Oil Change Toolbox

Installation Instructions
  • Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
  • Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
  • Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
  • Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
  • Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  • Apply film of clean oil to filter gasket.
  • Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
  • Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  • Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
OEM / Interchange Numbers: 1193976, 12490155, 1325690210, 1N3224, 1R0713, 1W2638, 25011099, 25011122, 25011159, 25011165, 25312506, 3130942, 349261040, 349261041, 349261041A, 3I0721, 3I1327, 5000816061, 6636137950, 6V5875, 778190, 8124901550, 82500111590, 8250111220, 8250111590, 8N9586, 8N9856, 8T7427, 94054051, 9N5570, 9N9586, D9HZ6731A, D9HZ6731B, H370725M22, PH3519, V1111842

FRAM Warranty Information:
Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 Months
Warranty Details