BOSCH
More Information for BOSCH 25011462
Continue Shopping
 
BOSCH 25011462  
$25.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$25.79
Total
Choose
BOSCH 25011462close
<
>
Part image
Sold Individually
BOSCH 25011462 Specifications
Bearings IncludedNo
Brake Surface FinishSolid
Center Bore Diameter60 mm
ConstructionSolid
Conventional Or Drum-In-Hat Type RotorConventional
Directional or Non-Directional Brake SurfaceDirectional
Disc FinishGeomet
Discard Thickness10 mm
Mounting Bolt Hole Circle Diameter105 mm
Mounting Bolt Hole Quantity5
Nominal Thickness12 mm
Outside Diameter267.9 mm
Overall Height45.1 mm
Product Height1.775591 in
Rotor Without Hub AssemblyYes
Rust Resistant CoatingYes
Thickness (Disc Brake Rotor)12 mm
QuietCast
Features & Benefits:
  • 100% Precision balanced to ensure smooth operation and minimize pedal pulsation
  • Heat flowed castings promote consistent wear for quiet operation and long life of the product
  • Aluminum-Zinc coating protection prevents rust and corrosion, extending life and provides better heat dissipation
  • OEM-Style vane configuration pulls heat from the inner part of the wheel, away from the caliper
  • ABS (Anti-lock Braking System) sensor rings allow for trouble-free operation of ABS/TCS on ABS/TCS equipped vehicles
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Additional Resources

Bosch QuietCast Brake Rotors Features
OEM / Interchange Numbers: 13502136, 23118283

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

Regular Inventory Warranty Information:
12 Months
Warranty Details