More Information for SUNSONG 3401795
Continue Shopping
SUNSONG 3401795  
SUNSONG 3401795close
Part image
SUNSONG 3401795 Specifications
End 1 Fitting Size (IN)3/8
End 1 Fitting TypeID Hose
End 2 Fitting Size (MM)16
End 2 Fitting TypeMale O-Ring
Hose Material 1CSM
Length (IN)50.5
Length (MM)1282
PS Switch Port?No

Return Hoses exceed original equipment performance standards with a max working pressure of 250 psi and are suitable for low pressure high temperature operations.


  • All tubing is manufactured from high grade steel and electroplated with a zinc coating delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required to ensure that all wearable parts are restored to original condition.
Installation Tips
  • Replace all power steering hoses at the same time, to prevent system contamination
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
OEM / Interchange Numbers: 26019302

SUNSONG Warranty Information:
12 Months