| CARDONE 2C18001 Specifications |
|---|
| Package Contents | Brake Drum, Instruction Sheet | | Product Condition | New | | Material | Aluminum/Cast-Iron | | Inside Diameter (in/mm) | 9.5" / 241.3 mm | | Maximum Brake Diameter (Discard) (in/mm) | 9.59" / 243.59 mm | | Mount Hole Diameter | 5 x 4.75" | | Nominal Drum Diameter (in/mm) | 9.50" / 241.3 mm | | Outer Cooling Fins | Yes | | Outside Diameter (in/mm) | 12.00" / 305 mm | | Bolt Circle Diameter | 0.45" / 11.43 mm | | Bolt Hole Quantity | 5 | | Brake Surface Finish | Non-Directional | | Center Bore Diameter (in/mm) | 2.81" / 71.5 mm | | Discard Inside Diameter (in/mm) | 9.59" / 243.59 mm | | Drum Construction | Casting |
|
|
- Aluminum composition resists corrosion and prevents rust from forming.
- Aluminum construction provides a lightweight alternative to heavy cast iron – producing a lower-inertia drum that stops quicker.
- Friction build-up is drastically reduced on the drum liner surface – decreasing brake fade and potential damage to the shoes.
- Product metallurgy significantly increases heat dissipation while using the existing O.E. cooling fin design.
|
|
