Motorcraft Remanufactured Calipers are designed, engineered and tested to provide excellent performance and long-life reliability. All components meet Ford engineering requirements and are engineered for a sure fit and easy installation.
All Motorcraft® remanufactured calipers receive new:
Seals
Boots
Phenolic pistons (where originally specified)
Bleed screws and caps
Slide pins and boots (where applicable)
Remanufactured calipers undergo the same testing methodology as O.E. calipers, which includes:
Seals tested for durability
Boots tested for leaks
Pistons tested for abrasion resistance
Calipers tested for high and low pressure leaks
Installation Tips
Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Warranty Information:24 months/unlimited miles; Motorcraft warranties are valid to U.S. customers onlyWarranty Details