More Information for MOOG K201396
Continue Shopping
MOOG K201396  
MOOG K201396close
Part image
MOOG K201396 Specifications
Base to Centerline0.570 IN
Base to Centerline14.5 mm
Bushing Quantity2
Height1.340 in
Inside Diameter1.180 in
Mounting Hardware IncludedNo
Outside Diameter1.570 in
  • Premium Materials -- Made from high-quality natural rubber material for durability and ride performance
  • Extended Service Life -- Less prone to splitting, discoloring or cracking with age for long life
  • Precise Engineering -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • Rigorous Testing -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

  1. Use a digital caliper or micrometer for a precise reading
  2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
  3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.

OEM / Interchange Numbers: 33551138104, 33552226373, 33552228368

Warranty Information:
Limited Lifetime