Go to RockAuto Home Page
More Information for STRONGARM 4516
Add to Cart
Continue Shopping
STRONGARM 4516close
Part image
Extended Length of 16.5 to 17.5; End Fitting Configuration. 10mm Ball- 10mm Ball; Force: 115-125; Rod to Tube (mm): 8 x 19
Great Support Comes from a Great Foundation
  • StrongArm gas springs use a patented triple-lobe piston rod seal designed to prevent gas leakage and to extend product life.
  • Designed to exceed industry standards, StrongArm can be pressurised with nitrogen gas up to 563 N (2,500 PSI). Most applications require only 338 N (1,500 PSI).
  • StrongArm gas springs are also designed to operate in temperatures extremes ranging from -40°C to 80°C.
Custom Engineered
  • To ensure safe and effective operation, StrongArm Gas Springs are custom engineered for each specific vehicle application.
  • No modification or adaptation required.
Individually Tested for Performance and Reliability
  • StrongArm gas springs are continually monitored during the assembly process to verify the correct pressure for each unit.
  • After assembly, each gas spring is tested in four different positions during compression and extension to measure speed and force.
  • Each lift is then subjected to two overload tests to assure structural integrity and safety.

Installation Guide
Installation Instructions
Body (in)19.00
Body ConnectionBall Socket (Nylon) 10mm
Compressed Length (in)10.60
Extended Length (in)17.20
Force (lbs)125.00
Hardware KitNo
Internal SpringsNo
Shaft (in)8.00
Shaft ConnectionBall Socket (Nylon) 10mm
Stroke (in)6.20

STRONGARM Warranty Information:
12 Months
Warranty Details