More Information for BBB INDUSTRIES N7320103
{Alternate Inventory Numbers: N732-0103}
Continue Shopping
+ Sold in packs of 1x1
BBB INDUSTRIES N7320103close
Part image
BBB Industries markets and sells their products under various brand names, including Genco, Vision-OE and Wilson. The product inside the box is the same, no matter what brand name appears on the box.
BBB INDUSTRIES N7320103 Specifications
Filter IncludedNo
Housing MaterialCast Iron
Inlet Attachment TypeReservoir
Inlet Quantity1
Installation Kit IncludedYes
New Or RemanufacturedNew
Number of Mounting Holes4
Outlet Attachment TypeThreaded
Outlet Diameter (IN)M16x1.50
Outlet SizeM16x1.50
Outlet Thread SizeM16x1.50
Pulley Attachment TypePress-on
Pulley IncludedNo
Remote ReservoirYes
Reservoir Cap IncludedNo
Reservoir IncludedNo
Sensor IncludedNo
Without Reservoir

BBB products are manufactured using 100% premium parts and are built and tested to meet or exceed OE standards. BBB does not substitute adapted, converted or “will fit” components, which means that the new unit is an exact replacement for the original equipment part.

Installation Tips
  • Replace Power Steering Pressure and Return Hoses when replacing the power steering pump. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new power steering pump
  • Where applicable, replace the Power Steering Reservoir or clean the internal filter
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Consider replacing the Belt (found in the Belt Drive category). Modern belts wear gradually and become less efficient, which can put strain on the Power Steering Pump and other belt driven components
  • Install the pump and all supplied o-ring seals according to installation instructions, to prevent leaking
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
  • A replacement Power Steering Pump can whine or make noise until air is purged from the fluid. Bleed the system during installation to prevent noise and extend the life of the steering components
Installation Videos

Flushing The Power Steering System

How To Troubleshoot and Install A Power Steering Pump

Pulley Installation

Vacuum Bleeding The Power Steering System

Additional Resources

Flush Procedure

Attention California Customers - WARNING: Cancer and Reproductive Harm

OEM / Interchange Numbers: 19318695

BBB INDUSTRIES Warranty Information:
3 years/36,000 miles