CARDONE
More Information for CARDONE 968715
{Alternate Inventory Numbers: 96-8715}
Continue Shopping
 
CARDONE 968715  
$129.79
Price
$0.00
Core
$129.79
Total
(Only 1 Remaining)
CARDONE 968715close
<
>
Part image
CARDONE 968715 Specifications
Hose Port TypeO-Ring
Housing MaterialCast Iron
Mounting Hardware IncludedNo
Package ContentsHydraulic Pump; Instruction Sheet; Sealing Kit
Power Steering Outlet Thread Size16X1.5
Power Steering Pump Inlet Attachement TypeHose Barb
Power Steering Pump Outlet Attachment TypeBolt-on
Power Steering Pump Outlet Quantity1
Power Steering Reservoir Cap IncludedYes
Product ConditionNew
Pulley Attachement TypePress-on
Pulley IncludedNo
Remote ReservoirNo
Reservoir IncludedYes
Includes Reservoir
Features:
  • 100% computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle
  • Manufactured with premium grade, high-temperature seals for added durability under all driving conditions
  • Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration
Hydroboost uses the pressure of the Power Steering Pump to power the Brake Booster. This is denoted by a third port on the Power Steering Pump and hoses that connect the pump to a brake unit behind the master cylinder.
Installation Tips
  • Replace Power Steering Pressure and Return Hoses when replacing the power steering pump. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new power steering pump
  • Where applicable, replace the Power Steering Reservoir or clean the internal filter
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Consider replacing the Belt (found in the Belt Drive category). Modern belts wear gradually and become less efficient, which can put strain on the Power Steering Pump and other belt driven components
  • Install the pump and all supplied o-ring seals according to installation instructions, to prevent leaking
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
  • A replacement Power Steering Pump can whine or make noise until air is purged from the fluid. Bleed the system during installation to prevent noise and extend the life of the steering components
Videos

Diagnosing Pump Failure vs. Rack Failure

Fill & Bleed Instructions

Flush Procedure

Additional Resources

Installation Checklist
Flush Procedure
OEM / Interchange Numbers: 26019740, 26019741, 7839798, 7839802, 7839810, 7840996

Warranty Information:
Limited Lifetime
Warranty Details