Severe Duty DOT 5.1 Non-Silicone Formulation; 12oz.
Trust Wagner Brake for the fluids that your vehicle's brake system needs for long-lasting dependability. Wagner brake fluids are specially formulated to meet and exceed Federal Motor Vehicle Safety Standards (FMVSS) to ensure compatibility with original equipment brake linings.
Brake Fluid Comparison Chart
Fluid Type
Compatible With
Quality
Chemical Composition
Minimum Dry Boiling Point
Minimum Wet Boiling Point
DOT 3
DOT 3 Brake Systems
Good
Glycol Ether
401°F
284°F
DOT 4
DOT 3 & DOT 4 Brake Systems
Better
Glycol Ether, Borate Ester
446°F
311°F
DOT 5.1
DOT 3, DOT 4 & DOT 5.1 Brake Systems
Best
Glycol Ether, Borate Ester
518°F
374°F
DOT 5
DOT 5 Brake Systems ONLY
Specialty
Silicone
500°F
356°F
How do I know if my brake fluid needs to be changed?
Brake fluid absorbs moisture. Water in brake fluid can boil during repeated or extended braking, creating air bubbles which reduce braking effectiveness. Water also can corrode metal brake lines. Change your brake fluid when:
Fluid is dirty or rust-colored (it should be clear or translucent)
Brake pedal feels mushy or requires a lot of pressure (possible air bubbles)
You've reached the miles or years your owner's manual recommends for fluid changes
Not returnable once opened.
Videos
The Different Types of Brake Fluid
Attention California Customers - WARNING: This product can expose you to ethylene glycol monomethyl ether, known to the State of California to cause birth defects or other reproductive harm. For information go to WWW.P65Warnings.ca.gov