|
NUGEON 9909348A
|
|
$45.99
Price
|
$50.00
Core
|
+ Sold in packs of 1x1
Pack
|
$95.99
Total
|
|
|
|
|
|
| NUGEON 9909348A Specifications |
|---|
| Anti-Squeal Shims Included | No | | Banjo Bolt Quantity | 1 | | Bleeder Screw Cap Included | No | | Bleeder Screw Included | Yes | | Bleeder Screw Thread (mm) | 10 mm | | Bleeder Screw Thread Size | M10 - 1.0 | | Bleeder Thread Size | M10-1.0 | | Bracket Included | Yes | | Bracket Mounting Bolts Included | No | | Caliper And Pad Hardware Included | No | | Caliper Color | Natural | | Caliper Finish | Rust Preventative | | Caliper Slides Included | Yes | | Caliper Type | Floating | | Crush Washer(s) Included | Yes | | Disc Brake Caliper Casting Material | Cast Iron | | Dust Boots Included | Yes | | Housing Cast Numbers | 3938/B | | Inlet Fitting Type | PLUG | | Inlet Port Thread Size (mm) | M10-1.0 | | Inlet Thread Size | M10 - 1.0 | | Mounting Bolt Included | No | | Mounting Bracket Included | Yes | | Mounting Hardware Included | Yes | | Pads Included | No | | Piston 1 Outside Diameter (in) | 1 in | | Piston 1 Outside Diameter (mm) | 38 mm | | Piston Diameter | 1.496 IN; 38 mm | | Piston Material | Steel | | Piston Quantity | 1 | | Wear Sensors Included | No |
|
|
| Remanufactured Caliper w/ Installation Hardware; Includes Mounting Bracket |
Only the best cores, without wear, corrosion or blemishes are selected for the NuGeon line. All components used are of the highest quality and every unit is pressure-tested with the same machines and parameters that are used at O.E.M. factories.
Features & Benefits:
- End-of-line pressure testing for leakage
- Piston replacement with same piston material as O.E. (phenolic/aluminum)
- Semi-loaded for end-user's choice of brake pad design and/or brand
- Pad hardware and brackets included in box
- Slider pins come pre-greased ensuring proper caliper movement and brake system stability
- New pin boots reduce the chance that moisture and contaminates will cause corrosion
- All rubber components are replaced assuring brakes perform at an optimal level
- Banjo bolts and copper crush washers provided (where applicable) to assure proper seat on the brake inlet and caliper housing
- New bleed screws ensure an airtight seal
 Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
WARNING:
Attention California Customers - WARNING: Cancer and Reproductive Harm. See www.p65warnings.ca.gov
|
NUGEON Warranty Information:Limited Lifetime |
|
