DURAGO
More Information for DURAGO BP369C
Continue Shopping
 
DURAGO BP369C  
$20.99
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $20.99
Total
Add to Cart
DURAGO BP369Cclose
Part image
Brake Pads are sold as a set. Quantity of one (1) is for both wheels
DURAGO BP369C Specifications
Abutment Clips IncludedNo
Backing MaterialIron
Chamfered EdgesYes
Friction Material AttachmentBonded
Friction Material CompositionCeramic
Inner Pad Friction Material Thickness0.46 IN; 11.7 mm
Inner Pad Height3.01 IN; 76.5 mm
Inner Pad Overall Thickness0.65 IN; 16.6 mm
Inner Pad Plate Thickness0.19 IN; 4.9 mm
Inner Pad Width4.92 IN; 125 mm
Mounting Hardware IncludedNo
Outer Pad Friction Material Thickness0.43 IN; 10.8 mm
Outer Pad Height2.3 IN; 58.4 mm
Outer Pad Overall Thickness0.62 IN; 15.7 mm
Outer Pad Plate Thickness0.19 IN; 4.9 mm
Outer Pad Width5.8 IN; 147.3 mm
Pad Shims IncludedYes
Pad Wear Sensor IncludedYes
Pad Wear Sensor TypeMechanical
SlottedYes
Ceramic
Features & Benefits:
  • High temperature friction material provides fade free performance
  • Single layer shims reduce noise and vibration
  • Integrally molded for superior bond retention and shear strength
  • Chamfered to reduce noise and improve stopping power
  • Slotted to dissipate heat and reduce fade
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions
Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material Cost Dust Level Noise Level Stopping Power Pad Life
Organic
 $ Dust CloudDust CloudDust Cloud Speaker IconSpeaker Icon Stop Sign Hourglass Icon
Semi-Metallic
 $$ Dust CloudDust Cloud Speaker IconSpeaker IconSpeaker Icon Stop SignStop SignStop Sign Hourglass IconHourglass Icon
Ceramic
 $$$ Dust Cloud Speaker Icon Stop SignStop Sign Hourglass IconHourglass IconHourglass Icon
Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

DURAGO Warranty Information:
12 months/12,000 miles