|
GATES 24850
|
|
($40.79/Foot)
Price
|
$0.00
Core
|
+ Sold in packs of 3x3
Pack
|
$122.37
Total
|
|
|
|
|
|
| GATES 24850 Specifications |
|---|
| Centerline Length | 36" | | Centerline Length (ft) | 3 | | Centerline Length (m) | .91 | | Construction | 4-Ply | | End 1 Inside Diameter | 3.125" | | End 2 Inside Diameter | 3.125" | | Material | Silicone | | Molded | No | | Working Pressure (psi) | 40 |
|
|
| 3 1/8" (40 psi); Durion® Silicone Coolant Hose |
- Extra long-lasting hose constructed with silicone rubber. Ideal for extremely
high temperature service in radiator, heater and other coolant transfer hose
applications.
- Excellent for extreme ambient and radiant temperature conditions.
- Resists weathering, ozone, heat and coolant deterioration.
- Silicone tube and cover resist prolonged exposure to under-hood and coolant
heat.
- Use PowerGrip SB clamps or silicone hose clamps.
- Temperature rating: –70°F to +350°F (–56°C to +177°C)
- Packaging: 3-ft. lengths.
- Exceeds SAE 20R1 (Class A Standard Wall) specifications.
Caution: Not recommended for fuel or oil transfer applications.
Note: Silicone hose’s water permeation rate is 10 to 15 times greater
than Gates Green Stripe coolant hose
 Cooling System Hose Standards
| SAE |
- SAE 20R1: Heavy duty service; standard wall or heavy wall
- SAE 20R2: Heavy duty service with embedded wire for kink and vacuum resistance
- SAE 20R3: Normal service heater hose (ID under 1 inch)
- SAE 20R4: Normal service radiator hose (larger IDs)
- SAE 20R5: Normal service with embedded wire for high flexibility and vacuum resistance
|
| CLASS |
- Class A: High temperature resistant (e.g. silicone)
- Class B: High oil resistant (e.g. nitrile)
- Class C: Medium oil resistant (e.g. neoprene)
- Class D-1: Low oil resistant; improved service (e.g. EPDM)
- Class D-2: Low oil resistant; standard service
- Class D-3: Low oil resistant; high temperature resistant (e.g. p-EPDM)
|
*
EC suffix: Electrochemically resistant rubber;
HT suffix: High temperature resistant rubber (>125°C)
|
|
