|
STRONGARM 4796
|
|
$8.35
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$8.35
Total
|
|
|
|
|
|
| STRONGARM 4796 Specifications |
|---|
| Compressed Length (IN) | 13.55 | | Cylinder Outside Diameter (MM) | 22 | | End 1 Material | Nylon | | End 1 Size (MM) | 10 | | End 1 Type | Ball Socket | | End 2 Material | Nylon | | End 2 Size (MM) | 10 | | End 2 Type | Ball Socket | | Extended Length (IN) | 16.73 | | Inner Shaft Diameter (mm) | 8 | | INTERNAL REBOUND SPRING | No | | Maximum Force (LB) | 109 | | Outer Cylinder Color | Black | | Outer Cylinder Material | Steel | | Stroke Length (IN) | 3.18 |
|
|
Great Support Comes from a Great Foundation
- StrongArm gas springs use a patented triple-lobe piston rod seal designed to prevent gas leakage and to extend product life.
- Designed to exceed industry standards, StrongArm can be pressurised with nitrogen gas up to 563 N (2,500 PSI). Most applications require only 338 N (1,500 PSI).
- StrongArm gas springs are also designed to operate in temperatures extremes ranging from -40°C to 80°C.
Custom Engineered
- To ensure safe and effective operation, StrongArm Gas Springs are custom engineered for each specific vehicle application.
- No modification or adaptation required.
Individually Tested for Performance and Reliability
- StrongArm gas springs are continually monitored during the assembly process to verify the correct pressure for each unit.
- After assembly, each gas spring is tested in four different positions during compression and extension to measure speed and force.
- Each lift is then subjected to two overload tests to assure structural integrity and safety.
Installation Guide
|
| OEM / Interchange Numbers: 4358328 |
|
