|
ACDELCO 18FR12624C
|
|
$102.99
Price
|
$70.00
Core
|
+ Sold in packs of 1x1
Pack
|
$172.99
Total
|
|
|
|
|
|
| ACDELCO 18FR12624C Specifications |
|---|
| Abutment Clips Included | Yes | | Anti-Rattle Spring Included | Yes | | Bleeder Thread Diameter | M10x1 | | Caliper Casting Material | Aluminum | | Caliper Color | Bronze | | Caliper Slides Included | No | | Caliper Type | Integral Parking Brake | | Casting Material | Aluminum | | Casting Number 1 | 271 | | Casting Number 2 | FORD T0833 RH | | Casting Number 3 | 922 | | Casting Number 4 | 8M51-2M088-B1 | | Casting Number 5 | 24 AISi7Mg | | Casting Number 6 | >GJS 2/10 | | Casting Number 7 | 38 | | Finish | Coated | | Height (IN) | 6.1 | | Length (IN) | 9.2 | | Mounting Bolt Thread Pitch (MM) | 1.500 | | Mounting Bracket Included | No | | Mounting Hardware Included | Yes | | Mounting Hole Diameter (IN) | 0.39 | | Pad Wear Sensor Included | No | | Pads Included | No | | Weight (lb) | 5 | | Width (IN) | 6.4 |
|
|
| Gold / Professional; Coated; Reman.; Pads Not Included |
ACDelco Gold (Professional) Remanufactured Coated Brake Calipers feature a robotic-applied, baked-on zinc plated coating that provides superior rust prevention against harsh environmental elements such as rain, snow, and corrosive road sprays.
Features & Benefits:
- Pressure tested to help ensure safe and confident braking
- Pre-lubrication of critical areas prevents binding
- Robotic-applied, baked-on zinc plated coating helps prevent pulsation and rust
- Meets 72-hour salt spray corrosion resistance per ASTM B117 testing standards
 Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
| OEM / Interchange Numbers: 19364853 |
|
