• Fabricados para que se ajusten con exactitud como resultado de un minucioso desarrollo y verificación.
• Built to meet or exceed the performance of the Original Equipment parts using advanced robotic welding and assembly.
• El acabado resistente a la corrosión ayuda a proteger el repuesto de las inclemencias del tiempo y de la carretera.
• Bushings are engineered to yield high durability while maintaining proper ride and feel.
• We provide these bushings as a pair so you can replace both sides at the same time.

Cómo Determinar el Diámetro de Barra Estabilizadora

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.