|
VICTOR REINZ 141013001
|
|
$53.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$53.79
Total
|
|
|
(Only 1 Remaining)
|
|
|
| VICTOR REINZ 141013001 Specifications |
|---|
| Bolt Head Size (IN) | 0.5906 | | Bolt Head Size (MM) | 15.0000 | | Color | Black | | Head Type | Hex | | Length (MM) | 190.0000 | | Material | Steel | | Minimum Length | 1.5000 | | Thread Diameter (MM) | 11.000 |
|
|
Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.
Features & Benefits:- Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
- When a specific tightening torque has been reached, the bolts are turned further through a defined angle, which pre-loads them into the plastic region. Consequently, no retorquing is necessary.
- Although it is a very effective means to get the maximum, uniform clamping load from each bolt, it permanently distorts the bolts, preventing them from being reusable under any circumstance.
Attention California Customers - WARNING: Cancer www.p65warnings.ca.gov
|
| OEM / Interchange Numbers: HB33128 |
VICTOR REINZ Warranty Information:12 months/12,000 miles |
|
