|
MOTORCRAFT BRRC104
|
|
$80.89
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$80.89
Total
|
|
|
|
|
|
|
|
|
Motorcraft Rotors are designed, engineered and tested to provide excellent performance and long-life reliability. As with all Motorcraft parts, these rotors are engineered for a sure fit and easy installation
Features & Benefits:
- High carbon casting for enhanced heat dissipation, vibration absorption and extended brake life
- 30,000 PSI Iron with metallurgical properties provides consistent hardness and strength for long-term durability
- Rotors are 100% certified, straddle-finished and mill-balanced to help ensure a uniform surface finish for a smooth driving and stopping experience
- Precise chamfered bolt hole locations and diameters help prevent distortion when tightening lug nuts during installation
- Designed for optimal performance and cooler operating temperatures with careful attention paid to rotor plate thickness and mass, and number and shape of cooling vanes
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
| OEM / Interchange Numbers: 1C3J2C502DA, 1C3Z1V125DA, 1C3Z1V125F, BRR266, BRR94, BRRF102, J2MZ2V026C, NBRR154, YC3Z2C026BB |
MOTORCRAFT Warranty Information:Transmission and Gas Engine Assemblies: 3 years/unlimited miles, including labor.
Diesel Engines for Light Trucks: 2 years/unlimited miles, including labor.
Sheet Metal: Limited Lifetime guarantee against rust perforation so long as original purchaser owns vehicle.
Loaded and Unloaded Struts and Shock Absorbers: Limited lifetime to original purchaser on noncommercial cars/light trucks
Spark Plug Wire Sets: Limited lifetime to original purchaser
All other parts: 24 months/unlimited miles
All Motorcraft warranties are valid to U.S. customers onlyWarranty Details |
|
