Engineered in Germany, Pagid is a development partner to many of the world's most famous vehicle manufacturers including Audi, BMW, Mercedes-Benz and even Porsche. If you drive one of these cars, there's a good chance it was fitted with Pagid brakes.
Pagid takes a holistic view to brake system development, which involves unprecedented reach and development, making sure our calipers are perfectly suited to the rest of the braking set-up. As a result, Pagid brake calipers are 100% pressure tested prior to leaving the factory and are pre filled with brake fluid out of the box for ease of fitment. Each brake caliper by Pagid has been designed specifically within the original manufacturer guidelines, making sure your customers experience excellent braking performance each time they use their brakes.
Installation Tips
Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Installation Tips