|
|
|
| Reman.; Includes: Hardware |
Motorcraft Remanufactured Calipers are designed, engineered and tested to provide excellent performance and long-life reliability. All components meet Ford engineering requirements and are engineered for a sure fit and easy installation.
All Motorcraft® remanufactured calipers receive new: - Seals
- Boots
- Phenolic pistons (where originally specified)
- Bleed screws and caps
- Slide pins and boots (where applicable)
Remanufactured calipers undergo the same testing methodology as O.E. calipers, which includes: - Seals tested for durability
- Boots tested for leaks
- Pistons tested for abrasion resistance
- Calipers tested for high and low pressure leaks
 Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
| OEM / Interchange Numbers: 6F9Z2552AB, 8G1Z2552A |
Warranty Information:24 months/unlimited miles; Motorcraft warranties are valid to U.S. customers onlyWarranty Details |
|
