Se somete a pruebas extremas de impacto, desgaste y fatiga para garantizar la calidad y durabilidad
El recubrimiento en polvo protector brinda protección contra el óxido y la corrosión contra el calor y las condiciones climáticas adversas
Cómo Determinar el Diámetro de Barra Estabilizadora
To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
Atención Clientes de California - Advertencia: Cáncer y daños reproductivos www.P65Warnings.ca.gov
Atención Clientes de California - Advertencia: Este producto contiene químicas conocidas en el estado de California que causa cáncer y defectos de nacimiento u otros daños reproductivos. para más información: www.P65Warnings.ca.gov
Fabricante Original de Equipo / Números de Intercambio: 10257316, 10257317, 10284146, 10287717, 10287944, 10404184, 10413385, 25861193, 25861194, 25861195, 25861196