3-1/4 pouces (40 livres par pouce carré); Tuyau en Silicone de Refroidissement de Durion®
Extra long-lasting hose constructed with silicone rubber. Ideal for extremely
high temperature service in radiator, heater and other coolant transfer hose
applications.
Excellent for extreme ambient and radiant temperature conditions.
Resists weathering, ozone, heat and coolant deterioration.
Silicone tube and cover resist prolonged exposure to under-hood and coolant
heat.
Use PowerGrip SB clamps or silicone hose clamps.
Temperature rating: –70°F to +350°F (–56°C to +177°C)
Packaging: 3-ft. lengths.
Exceeds SAE 20R1 (Class A Standard Wall) specifications.
Caution: Not recommended for fuel or oil transfer applications.
Note: Silicone hose’s water permeation rate is 10 to 15 times greater
than Gates Green Stripe coolant hose
Système de refroidissement Tuyau Standards
SAE
SAE 20R1: Service intensif; paroi standard ou paroi épaisse
SAE 20R2: Service intensif avec fil intégré pour une résistance aux nœuds et au vide
SAE 20R3: Service standard, tuyau de radiateur de chauffage (diamètre intérieur inférieur à 1 pouce)
SAE 20R4: Service standard, tuyau de radiateur (diamètres intérieurs plus grands)
SAE 20R5: Service standard avec fil intégré pour une grande flexibilité et une résistance au vide
Classe
Classe A: Résistant aux hautes températures (p. ex. silicone)
Classe B: Haute résistance à l'huile (p. ex. nitrile)
Classe C: Résistance à l'huile moyenne (p. ex. néoprène)
Class D-1: Faible résistance à l'huile; service amélioré (p. ex. EPDM)
Classe D-2: Faible résistance à l'huile; service standard
Classe D-3: Faible résistance à l'huile; résistant aux hautes températures (p. ex. p-EPDM)
*
Suffixe EC: Caoutchouc résistant à l'électrochimie;
Suffixe HT: Caoutchouc résistant aux hautes températures (>125°C)
Numéros de constructeur de l'équipement d'origine / numéros d'échange : D9PJ8333DA, D9PZ8333J