ST2 Upgrade Disc - High torque sprung 6 puck ceramic performance disc assembly. The ST2 disc is lined with Carlisle sintered friction buttons and are assembled with precision engineered components designed for increased horse power applications. Each disc uses a thicker retainer stamping and increased hardness hub to ensure maximum strength and reliability. For additional strength and reliability the ST2 disc uses a partial closed spring window that provides additional spring support and protection. M-Pact's sprung assembly construction helps to dampen torsion vibrations for smooth engagement and operation. The ceramic buttons on the ST2 clutch disc provide a slightly aggressive engagement with a stock pedal effort will make this upgrade kit suitable for most street performance enthusiasts.

Tips & Tools For The Job

• Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
• Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
• Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
• Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
• Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.