STANDARD MOTOR PRODUCTS RU571
|
|
$39.79
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$39.79
Total
|
|
|
|
Especificaciones de STANDARD MOTOR PRODUCTS RU571 |
---|
Método de fijación | Perno Soporte | Bombilla Incluido | No | Bobina Tipo | Electrónico | Color/Acabado | Negro | Género de Conector | Macho; Hembra | Conector Cantidad | 2 | Forma del Conector | rectangular | Hardware incluido | No | Arnés Longitud - centímetros | 32 | Arnés Longitud - pulgadas | 7 " | Arnés Longitud - Milímetro | 260.35 | Material de Carcasa | plástico | Abrazadera de Montaje(s) Incluido | Sí | Número de Conector Cavidades | 9 | Número de velocidades | 3-5 Velocidades | Ancho Total (Milímetro) | 93.472 | Interruptor Activación Estilo | Cazonete | Interruptor Forma | rectangular | Género de Terminal | Macho; Hembra | Cantidad de Terminales | 9 | Tipo de terminal | Hoja | Voltaje | 12 | Ancho - pulgadas | 3.68 | Alambre Cantidad | 2 | Arnés de Cableado Incluido | Sí |
|
|
Standard® is the premier professional engine management brand in the automotive aftermarket today. Standard leads the way in advanced automotive technology with more than 40,000 products for complete vehicle coverage.
Features & Benefits:- All parts are manufactured to stringent quality requirements. Their plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
- As a global manufacturer of original equipment ignition products, they maintain complete quality control throughout the manufacturing process from componentry to finished product
Two or Four Mounting Holes? Standard® RU571 and RU371 are used on the same vehicles, with respect to year, make and model. To make things more complex, the Standard® RU571 requires the original resistor mounting plate be discarded and the replacement unit bolt directly to the blower case. The GM replacement resistor is not the same as the OE part. Use the information below to help decide which resistor each vehicle requires.
Standard® RU571 (GM 89019088)- Discard the existing mounting plate to install the replacement unit
- Mount this resistor directly to the blower case
- This resistor has 4 mounting holes
- In most cases, vehicles without a console will use the RU571
Standard® RU371 (GM 89019089)- This resistor mounts with no modifications
- It has 2 mounting holes
- In most cases, vehicles with a console will use the RU371
Replace the Connector:
GM Technical Service Bulletin 05-01-38-012C concerns the failure of the OE blower motor resistor and the subsequent damage to the vehicle harness connector. This TSB recommends replacement of the vehicle harness pigtail when replacing the blower motor resistor. SMP offers this replacement pigtail as Standard® S916.
¿Es el Motor de Ventilador o Módulo de Control/Resistencia de Motor de Ventilador? El Módulo de Control / Resistencia de Motor de Ventilador controla el Velocidad de Ventilador del Motor de Ventilador. Cuando falla, puede hacer que el Motor de Ventilador deje de funcionar y puede causar confusión sobre qué parte está defectuosa.
Motor de Ventilador |
Signos de Falla:- Flujo de Aire débil de los Respiraderos
- Ruidos o Vibraciones Inusuales Cuando se Enciende el Ventilador
|
Módulo de Control / Resistencia de Motor de Ventilador |
Signos de Falla:- No Hay Flujo de Aire de los Respiraderos
- Sopla aire a una sola velocidad
|
Adicional Recursos Forma de Instrucciones GF10146B
|
Fabricante Original de Equipo / Números de Intercambio: 22807123, 89018308, 89018596, 89019088 |
|