|
BH SENS RDE228V21
|
|
$31.79
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$31.79
Total
|
|
|
|
|
|
| Especificaciones de BH SENS RDE228V21 |
|---|
| Frecuencia MHz | 315 MHZ | | Tipo de Sensor | Equipo Original Equivalente Sensor | | Válvula Longitud | 43 mm | | Tipo de Válvula | Válvula de Metal |
|
|
| Calidad de equipo original; 315MHz; Programado |
no es necesario programar Antes de Instalación - Siga el proceso de reaprendizaje del equipo original Después de Instalación.
The BH SENS Group is one of the pioneers in the development of modern direct measuring Tire Pressure Monitoring Systems (TPMS) for well-known car manufacturers and is one of the world's largest providers of TPMS solutions. BH SENS provides the market with original replacement sensors in OE quality for all systems supplied to vehicle manufacturers. Their replacement tire pressure sensors can be installed directly without programming. To relearn the tire pressure sensors, simply follow the relearn instructions from the vehicle manufacturer.
Features & Benefits:
- OE Equivalent Direct-Fit TPMS Sensor with Metal valve (clamp-in)
- Equivalent in function, fit and quality to the OE sensor
- No programming required. Quick installation with only a relearn process needed
- Just install sensor and relearn the vehicle
- WAL technology for locating tire position
- Flexible valve angle 0 to 36 degrees
 Metal Valve (Clamp-In) style TPMS Sensors have higher speed ratings (typically up to 155 mph) than Rubber Valve (Snap-In) styles (typically up to 115 mph).
Metal (Clamp-In) Installation: The valve piece is attached to the sensor body, and the valve core is secured with a nut and rubber grommet.
 Programa versus Clon versus Reaprender Don't confuse TPMS Sensor Relearning, Programming and Cloning! Some processes require a Tire Pressure Monitoring System (TPMS) Programming Tool to complete, but not all processes are required (or available) for every application.
| PROGRAM |
Required only for Universal (Programmable) Sensors, in addition to TPMS Sensor Relearning. A TPMS Tool is required to:
- Program the specific Year/Make/Model protocol for the vehicle into the sensor
- Create or Clone a sensor ID onto the sensor
BEFORE INSTALLATION |
| CLONE |
Ideal for drivers who frequently swap wheels/tires, such as during the winter season. A relearn procedure is not required when sensors are cloned. A TPMS Tool is required to:
- Copy/Clone the unique ID from the original TPMS Sensor to the replacement sensor
BEFORE INSTALLATION |
| RELEARN |
Required when a new (not cloned) sensor ID is introduced or when the tires are rotated. A TPMS Tool may be required to:
- Write the unique sensor IDs to the vehicle's computer
- Assign the IDs to the correct wheel position (for vehicles that display pressure by location)
AFTER INSTALLATION |
Atención Clientes de la UE: Sensores de TPMS (Sistema de Monitor de Presión de Neumáticos) transmiten a 433 MHz en la Unión Europea - este sensor transmite a 315 MHz y no funcionará en vehículos que operen en la UE. Seleccione un recambio de '433 MHz' bajo su vehículo, o busque recambios universales en Herramientas & Universal Repuestos > Rueda > Neumático > Sensor de Sistema de Monitor de Presión de Neumático (TPMS).
Atención Clientes de California - Advertencia: Este producto puede exponerlo al 1,3-butadieno, una sustancia química conocida en el estado de California como causante de cáncer, defectos de nacimiento u otros daños reproductivos - www.P65Warnings.ca.gov
|
BH SENS Información de Garantía:36 meses |
|
