ACDELCO 18FR12332N
|
|
$81.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$81.79
Total
|
|
|
|
ACDELCO 18FR12332N Specifications |
---|
Bleeder Thread Diameter | M10x1 | Caliper Casting Material | Cast Iron | Caliper Color | Silver | Caliper Type | Floating | Casting Material | Cast Iron | Finish | Plain | Height (IN) | 6.12 | Inlet Fitting Type | Straight | Length (IN) | 9.25 | Mounting Bolt Thread Pitch (MM) | 1.750 | Mounting Bracket Included | No | Mounting Hardware Included | No | Mounting Hole Diameter (IN) | 12 | Pad Wear Sensor Included | No | Pads Included | No | Piston Material | Steel | Weight (lb) | 12 | Width (IN) | 6.44 |
|
|
Gold / Professional; Pads Not Included |
ACDelco Gold (Professional) new calipers are manufactured to meet your expectations for fit, form, and function. Developed without attached brake pads, these calipers allow for customization for the application at hand.
Features:
- NEW units are manufactured under the guidelines of ISO Quality Standards to help ensure consistent quality
- All components are 100% NEW to provide maximum performance
- Caliper housing bolts tightened to manufacturing torque specifications
- Critical components are lubricated for smooth operation
- New pistons, bleeder screws, and copper washers for ease of installation
- No Core Return Required
Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
OEM / Interchange Numbers: 19384085 |
|