OSC
More Information for OSC 13245
Continue Shopping
 
OSC 13245  
$68.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$68.79
Total
OSC 13245close
Part image
OSC 13245 Specifications
Core Height (IN)24 7/16
Core Width (IN)15 5/16
Core Thickness (IN)5/8
Core Thickness (MM)16
Inlet Header Width (IN)1 7/16
Inlet Header Length (IN)16 1/16
Outlet Header Width (IN)1 7/16
Outlet Header Length (IN)16 1/16
Inlet Diameter (IN)1 3/16
Outlet Diameter (IN)1 1/4
Down Flow Or Cross Flow TypeCrossflow
Transmission Oil Cooler IncludedNo
Core MaterialAluminum
Core Row Quantity1
Tank MaterialPlastic
Engine Oil Cooler IncludedNo

Features & Benefits

  • Drop in fit, form and function for hassle-free installation
  • All necessary hardware or fittings are included in each unit
  • 100% Leak Tested
  • Premium grade tubes, fins, headers, tanks, and other components
  • Components are fitted and torqued in place to factory specifications
Service Tip: If you are experiencing unexplained or reoccurring radiator core leaks, or notice dark spots on your failed radiator core, test your coolant for Electrolysis. If detected, correct the source of the problem before replacing your failed radiator to prevent repeat failure.
OSC's Testing Process
  • Cycle testing - flowing preheated fluid through the unit as the pressure is raised and decreased to imitate driving conditions a minimum of 30,000 cycles.
  • Vibration testing - used to simulate pot holes, curbs and off-road use.
  • Burst testing - the gradual increase of pressure until the unit fails pointing out the weakest area of the unit.
  • Environmental testing - salt and chemical spray imitating road conditions found driving during winter and coastal conditions.
Measurement Guide

Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Videos

OSC Manufacturing Standards

OEM / Interchange Numbers: 55111352AA, RAD13245

OSC Warranty Information:
Limited Lifetime